7100 4T 15W-50

Lubrificante 4-tempi 100% sintetico – Tecnologia Estere - Agevole cambio marcia. Migliorata la resistenza al taglio. Soddisfa le specifiche JASO MA2 per ottimizzare le prestazioni della frizione a bagno d'olio. Adatto per convertitori catalitici.

APPLICAZIONELUBRIFICANTI MOTORE
TIPO DI MOTORE4 TEMPI
TIPO DI PRODOTTO       7100 4T
TECNOLOGIA100% SINTETICO
GAMMA PRODOTTO MOTO
VISCOSITÀ15W50
SPECIFICHE APIAPI SG/SH/SJ/SL/SM/SN
SPECIFICHE JASOJASO MA2 M033MOT125
IMBALLO 1L

TYPE OF USE
High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with
4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3
emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection
into exhaust pipe...
Recommended for specific DUCATI, KTM, BMW engines requiring SAE 15W-50 viscosity grade oil.
Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…
PERFORMANCE
STANDARDS API SN / SM / SL / SJ / SH / SG
SPECIFICATION JASO MA2 under N° M033MOT125
Protection
Ester Technology:
- Low traction coefficient Ester to minimize engine internal friction losses and improve
performance
- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear
protection and life time.
100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.
Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of
catalytic converters.
The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test
results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates
fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are
then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS
14 (outstanding result).
Comfort
JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1
and MA2.
JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three
riding modes: Starting, Acceleration and Constant Speed.
RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Color Visual Red
Viscosity grade SAE J 300 15W-50
Density at 20°C (68°F) ASTM D1298 0.864
Viscosity at 40°C (104°F) ASTM D445 126.5 mm²/s
Viscosity at 100°C (212°F) ASTM D445 18.0 mm²/s
Viscosity Index ASTM D2270 158
Pour point ASTM D97 -30°C / -22°F
Flash point ASTM D92 236°C / 456.8°F
TBN ASTM D2896 8.4 mg KOH/g